Tel: 0845 3637131
Follow us
Clcik here to see our facebook page. Join us on Twitter.
 
 
Read all the latest information on our blog.

 

Spray Adhesive (STA-STUCK)

Spray Adhesive (STA-STUCK)
Spray Adhesive (STA-STUCK)
Product Code: spray-adhesive-sta-stuck
Availability: In Stock
Price: £9.00
Ex Tax: £7.50
Qty:  
      

Sta-Stuck aerosol contact adhesive for bonding soundproofing and sound absorbing products.

Can size: 15oz (426 grams) Coverage: 6-8m2/can approx
 
Key Benefits
  • Ideal to stick most of our soundproofing and sound absorbing products
  • Water and heat resistant.
  • Clear in colour
  • Adjustable web spray nozzle
  • Low solvent content
  • Heat resistant up to 250oF/121oC

Our Sprayable Contact Adhesive is an adhesive ideal for sticking our Soundproofing Mat to a wide variety of surfaces as a temporary fix. It has a high solids content and is water resistant and heat resistant with permanent flexibility.

This glue is also useful for permanently sticking a wide variety of other products including our acoustic foam and M20AD wall insulation. It is particularly good to work with due to its low solvent content which does not leave strong fumes lingering after use.
 
DIRECTIONS
 
PLEASE NOTE !! THIS IS A CONTACT ADHESIVE. ONCE THE PRODUCT IS OFFERED UP TO THE SURFACE AND STUCK IT CANNOT BE EASILY RE POSITIONED.
 

Shake can well before use (especially in cold conditions) Best results are obtained when working in an ambient temperature of 70 deg F/21 deg C with surfaces to be bonded properly conditioned. Ensure all surfaces are thoroughly clean and free from moisture, dirt, dust and grease or any other materials that could affect the bond. For vertical or horizontal patterns, turn tip in spray nozzle clockwise to adjust the spray pattern. Hold spray can 6 to 8 inches from the surface and apply in even coats, making sure the adhesive 'webs' across the surface. Do not hold closer than 6 inches or 'wet' the surface.

It is important the adhesive 'webs' across the surface and 80 - 100% coverage is achieved. One surface should be sprayed vertically and the other horizontally. Do not concentrate in one spot or allow the adhesive to 'puddle'. Double coating applications are recommended on porous surfaces (after the first coat has dried, apply a second coat evenly on top). Allow adhesive to tack (approx 2 - 4 minutes) and bond together with a firm pressure over the entire area. Tack time can vary depending on climate conditions. It is important that maximum uniform pressure is applied to over the entire area bonded to achieve maximum bond strength. Use the Spray Contact Adhesive in well ventilated conditions.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Tags: