Linoroll, a 5mm resilient high density recycled rubber acoustic underlay for impact noise reduction for vinyl and lino covered floors.
Size: 10m x 1.25m x 5mm thick
Produced from recycled rubber
Easy to cut and install
Only 5mm thick
Dramatically reduces footfall noise through vinyl and lino covered floors
A highly efficient 5mm resilient high density recycled rubber acoustic underlay for impact noise reduction when used beneath vinyl and lino floors.
To Treat Impact noise Only
Ensure all floorboards are securely laid and tightly screwed down. Use our Acoustic Sealant to seal between the joists and around the floors perimeter. Open the roll and lay from wall to wall. Do not overlap, simply butt join sections where necessary. Glue a layer of hardboard on top of the Linoroll. Finally lay your floor covering directly on top as normal.
To Treat for Impact Noise and Airborne Noise
Infill in the cavity with our Acoustic Mineral Wool then screw the floorboards back down so they don't squeak. Use our Acoustic Sealant to seal the joints and around the floor's perimeter.
Lay two layers of our Soundproofing Mat directly on top of the floorboards. Make sure the second layer is laid overlapping the joints of the first layer. Both of these layers should be secured either with felt nails or glued using our Sta-Put adhesive. Open the (Syl) Linoroll 5 and lay from wall to wall without overlapping and glue down with Sta-Put.
Glue a layer of hardboard or similar on top of the Linoroll before finally installing your chosen floor covering as normal.