Thin recycled soundproofing pad for party walls and separating walls. To be fitted with 30mm of high density Acoustic Plasterboard glued on top.
Size: 1m x 1m
Reduces normal levels of airborne noise through a wall.
Made from recycled rubber
Minimum loss of wall space (Less than 2 inches or 50mm)
Effective on lightweight and single skin walls.
Easy to install.
Complies with PART E building regulations.
M20AD is a thin soundproofing pad designed to absorb and reduce normal levels of airborne noise that should not usually be heard through a party wall. Easy DIY fit, this 20mm thick soundproofing pad is simply glued to any smooth wall with two layers of 12.5mm or the more efficient 15mm high density acoustic plasterboard bonded on top and is an easy solution that takes up a minimum amount of space.
It is ideal for soundproofing walls separating stairs and hallways where space is at a premium. Particularly useful for meeting Part E building regulations for airborne noise control through any separating wall.
The soundproofed wall shown in the detail below has approx 87% reduction in sound transmission and complies with the requirements of the latest Building Regulations. It is therefore, ideal for insulating walls separating stairs and hallways where space is at a premium.
THE ADHESIVE NEEDED TO BOND THIS PRODUCT IS OUR SPECIAL SPRAY CONTACT ADHESIVE. ONCE THE PRODUCT IS GLUED USING THIS ADHESIVE, IT IS THERE TO STAY.
Please note: This insulation is effective at reducing normal noise levels, that should not be heard, for example talking, radio and TV sound at normal volumes. Loud music, bass noise and loud speech will always be heard although its intensity will be reduced.
We also supply QuietPanel, a thinner 27.5mm product that can be used when space is limited to that thickness. Please note that thinner options will not perform as well whereas thicker options will give better soundproofing performance.
PLEASE BE AWARE THESE PANELS WEIGH APPROX. 15kg EACH SO YOU MAY REQUIRE HELP WHEN LIFTING.